When you are ready for a party, no need to drag the coolers out of the basement or garage. Just bring out some drinks and some ice and your ready to party!
Are you a DIYer who loves working with wood? This cooler picnic table has built in trays to keep your drinks cold while out in your yard.
Building this table is a great DIY project you will be proud of. Depending on the type of wood species used, materials will run anywhere from $150 – $350. Cedar, a wonderful choice for outdoor furniture, will cost significantly more than Douglas fir, which is what was chosen for the table you see.
Materials:
-
5 – 2×8 8′ length (table top)
-
2 – 2×6 8′ length (ice box lids)
-
5 – 2×4 8′ length (framing/skirting)
-
2 – 4×4 8′ length (table legs)
-
3 – 1×4 8′ length (ice box supports)
-
2 – plastic planter boxes – see photo below
-
2 1/2″ Kreg pocket screws
-
1 1/2″ Kreg pocket screws
-
1 3/4″ Deck screws
-
8 – 5/16″ x 3″ bolts
-
8 – 5/16″ washers
-
8 – 5/16″ wood anchors
-
120 grit sandpaper
-
80 grit sandpaper
-
Pre-conditioner, stain, exterior spar varnish, foam brushes, fine sanding block
Tools:
-
Measuring tape
-
Pencil
-
Drill
-
Table saw (optional but very helpful)
-
Miter saw or circular saw
-
Orbital sander
-
Kreg Jig
-
Clamps
-
2 1/8″ hole saw
Read more at remodelaholic.com