When we purchase things that are brand new, they look and work great. Then as we use them, it loses some of that luster and my not preform as well as when we first got them.
We all know things like changing the oil in our vehicle, keeping the gutters clean, or adding a fresh coat of paint before it needs it, will help prolong the life of these things. But sometimes we neglect simple things we can do to keep our tools and equipment in good condition.
Here are some great tips to keep your stuff in good working condition and keep them working for years to come.
Vacuum Your Carpet Often
On carpet, dirt acts like thousands of little blades. Walking across a dirty carpet grinds sharp dirt particles against the yarn, making tiny nicks in the fibers. That dulls the sheen, which is why high-traffic areas appear duller than the rest of the carpet. Over time, grinding dirt will actually wear away the fibers themselves.
Bottom line: The less dirt in your carpet, the longer it will last. A good rule of thumb is to vacuum your carpet once a week. High-traffic areas will require more frequent vacuuming.
Keep Batteries Charged
Batteries can deteriorate and die if they go a long time without being charged. Charge the batteries for your boat, motorcycle or riding lawn mower at least once a month in the off-season. Another option is to hook them up to a battery maintainer. A battery maintainer won’t damage your battery like a trickle charger would. A maintainer has smart monitoring circuitry that charges the battery only when it needs it. Remove the battery and store it indoors if you live in an area with severely cold winters.
MYTH: Don’t store batteries on a concrete surface.
FACT: According to the folks at Interstate Battery, “Tremendous technological improvements have been made in the seals around the battery posts and vent systems, which have virtually eliminated electrolyte seepage and migration. So, it’s OK to set or store your battery on concrete.”
Lubricate Bits and Blades
Use Boelube to make drill bits last longer. Whenever you drill multiple holes in metal, stick the bit into the lube before starting each one. It also works on metal-cutting reciprocating and band saw blades. It reduces friction, which makes the cutting edge last longer. The product number is 70200-13, and it is available from multiple online retailers.
Rinse Your Spreader
Chemicals from fertilizers speed up corrosion of the metal parts of your spreader, so rinse it out every time you use it. After it dries, coat all the moving parts with a light lubricant spray like WD-40.
Keep the Roof Clean
Leaves and moss can trap water and cause your roof to deteriorate prematurely. You can blow the leaves off a low-pitched roof with a leaf blower. On steeper roofs, you can pull them off with a broom on an extension pole. And it’s wise to trim back all branches that are close to or touching the shingles.
Chemically treat mold, then sweep it off with a soft broom. A diluted bleach solution will kill mold but could also kill the plants on the ground below, so be careful to spray just enough to soak the mold itself. Specific roof cleaners containing fungicide are also available. Installing zinc strips at the peak of the roof can help keep mold at bay.
Some great advice from from familyhandyman.com
Keeping all the tings around your home clean takes a little time, but will save you a bunch of money in the long run.